3D Printed Cases
On this page you will find all the cases that you can 3D print for the Home Assistant Glow. If you've made some changes on the cases, I'd appreciate it if you add the new case design to the repository for everyone to benefit 😉
Photodiode PCB
This case consists of 2 parts, a top and bottom where you can slide the parts over each other. If you would like to make adjustments to the original design, you can download and use the STEP file.
| Name | Description | ⬇️ |
|---|---|---|
| Sensor - Top | Top part of the case for the sensor | Download |
| Sensor - Bottom | Bottom part of the case for the sensor | Download |
The photodiode case files are also available on Printables.
ESP32S
This case consists of 2 parts, a top and bottom where you can slide the parts over each other. In a way that leaves room for the Dupont jumper cables. If you would like to make adjustments to the original design, you can download and use the STEP file.
| Name | Description | ⬇️ |
|---|---|---|
| ESP32S - Top | Top part of the case for the ESP32S | Download |
| ESP32S - Bottom | Bottom part of the case for the ESP32S | Download |
The ESP32S case files are also available on Printables.
ESP32-WROOM-32D
This case consists of 2 parts, a top and bottom where you can friction fit the pieces over each other and is designed to be used in both an indoor and outdoor environment. The LED status light is designed to slide into the housing and form a relatively tight seal. The USB cable is designed to slide up to provide some protection to water intrusion.
If you're familiar with OnShape, you can access the model using this link. Simply make a copy and customize it according to your specifications. Please note that having an account might be necessary to make adjustments.
| Name | Description | ⬇️ |
|---|---|---|
| ESP32 WROOM - Top | Top part of the case for the ESP32D | Download |
| ESP32 WROOM - Bottom | Bottom part of the case for the ESP32D | Download |